ABB PVS800-57B, Hardware Manual, Page: 57 / 84

Technical data 57
Ambient conditions
Environmental limits for the inverter are given below. The inverter is to be
used in indoor environment.
Note : If the installation has ventilation ducts directly to outdoors, the back
flow of moist and dusty air must be prevented.
Operation
installed for stationary
use
Storage
in the protective
package
Transportation
in the protective
package
Installation site altitude 0 to 3000 m (9842 ft)
Above 1000 m (3281 ft),
see section
Altitude
derating on page 48.
- -
Air temperature -20 °C to +50 °C (-4 °F
to +104 °F). No
condensation allowed.
Output derated in the
range +50 °C to +60 °C
(+104 °F to +122 °F).
See section
Derating
(page 47 ). If the
operating temperature
falls below 0 °C (32 °F),
cabinet heater option
G300 has to be used. No
frost allowed.
-40 to +70 °C
(-40 to +158 °F) -40 to +70 °C
(-40 to +158 °F)
Relative humidity 5 to 95% Max. 95% Max. 95%
Environmental category Indoor conditioned
Wet conditions Not to be used in wet locations. The installation location must be dry.
Pollution degree 2. Normally only non-conductive pollution is allowed.
Contamination levels
(IEC 60721-3-3,
IEC 60721-3-2,
IEC 60721-3-1)
No conductive dust allowed.
Chemical gases:
Class 3C1
Solid particles:
Class 3S2
Chemical gases:
Class 1C2
Solid particles:
Class 1S3 Chemical gases:
Class 2C2
Solid particles:
Class 2S2
Atmospheric pressure 61.6 to 106 kPa
0.7 to 1.05 atmospheres 70 to 106 kPa
0.7 to 1.05 atmospheres 60 to 106 kPa
0.6 to 1.05 atmospheres
Vibration (IEC 60068-2) Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz) sinusoidal
Shock (IEC 60068-2-27) Not allowed Max. 100 m/s
2
(330 ft/s
2
), 11 ms
Max. 100 m/s
2
(330 ft/s
2
), 11 ms
Free fall Not allowed Not allowed Not allowed
Materials
Cabinet Hot-dip zinc-coated (thickness approximately 20 micrometers) steel sheet
(thickness 1.5 mm) with polyester thermosetting powder coating (thickness
approximately 80 micrometers) on visible surfaces except back panel.
Color: RAL 7035 (light beige, semigloss).
Air filters on the cabinet
door AIR-TEX G-150
Busbars Tin-plated copper or aluminum
Fire safety of materials
(IEC 60332-1)
Insulating materials and non-metallic items: mostly self-extinguishing