ABB PST Series, Installation And Commissioning Manual

Page: 59 / 178

59
1SFC132003M0201
+XPDQ0DFKLQH,Q0,
&KDSWHU
6WDUW6WRSWKHPRWRU
6WDUW
Enter the Start/Stop menu, figure 22.
Select
6WDUW
The motor will now start and run according to
the set parameters.
6WRS
Select
6WRS
. The motor will stop according to the set
parameters. It is possible to press stop command during
the start ramp if required.
-RJ
Enter the Jog menu, figure 23.
Select
-RJ
The motor will start and accelerate to rated
speed according to the set parameters as long as the Jog
command is activated.
The motor stops immediately as soon as the command is
released.
'2/VWDUW
367%RQO\
6WDUWIURPWKHVRIWVWDUWHU
If required, the motor can be started DOL (Direct On Line)
with the integrated by-pass contactor.
Select the DOL start menu, figure 25.
Select
'2/VWDUW
to close the integrated by-pass contactor.
Select
6WRS
to open the contactor.
:DUQLQJ
7KHUDWHGPRWRUFXUUHQWPXVWQHYHUH[FHHGWKH'2/
UDWLQJRIWKHLQWHJUDWHGE\SDVVFRQWDFWRU
)LJXUH 6WDUW6WRSPHQX
Top level
Local Control
Settings
Start/Stop
Jog
DOL Start
Event Log
Status Information
Reset Events
Top level
Local Control
)LJXUH -RJPHQX
Jog
Settings
Event Log
Status Information
Reset Events
Start/Stop
DOL Start
Top level
Local Control
)LJXUH'2/VWDUWPHQX
DOL start
Settings
Event Log
Status Information
Reset Events
Jog
Start/Stop