ABB PSE18, Replacing Manual

Page: 7 / 7

- 7 -
4. Configuration of the HMI module
The HMI module is programmed for PSE18, follow the step below to change to the correct size of
the Softstarter:
1. Switch on the power supply (terminal 1 and 2).
2. Press and hold the “ Exit ”, “ Select ”, “ arrow up ” buttons for 3 sec.
3. The display now shows Id.
4. Push “ Select ”. 18 is now flashing in the display.
5. Push “ arrow up ” one or several times to select the correct size of PSE.
6. Push “ Select ” to store.
7. Change the other parameters as needed.
8. Put on the marking label for the selected Softstarter.
Ready for start!!
ABB AB Control Products
SE-721 61 Västerås, SWEDEN
Telephone
+46 21 32 07 00
TELEFAX +46 21 12 60 01
www.abb.com/lowvoltage