DISTRIBUTION SOLUTIONS
15
7.2
Hardware interfaces
The following interfaces are located on the
backplate of the device:
• 1 connector for multibus (J4 or J5)
• 1 connector for sensor bus (J2) to connect to
SWICOM, J3 to connect to other PDCOM with in/
out connection
- The connector is standard RJ45 cable straight-
through category 5 or 6
• 1 connector for ethernet (J1)
• 1 connector to PDCOM interface (J8)
- The connector is standard DB9 straight-through
• 1 connector for USB interface (J7)
• 1 connector for auxiliary power supply (J6)
Refer to electrical scheme (“1VCD400305”).
Figure 17: PDCOM connectors
