background image

4

OVRHLD SERIES

  SU R G E  P R OT EC T I V E  D E V I C E S

 

WARNING!: 

THE OVRHLD SERIES WARRANTY IS VOIDED if the 
unit is damaged as a result of improper installation 
or the installer’s failure to verify the following 
conditions prior to installation.

 

WARNING!: 

HAZARDOUS VOLTAGES PRESENT: Improper 
installation or misapplication may result in serious 
personal injury or damage to the electrical system. 
Read the complete installation instructions before 
proceeding with installation. Remove all power to 
the electrical panel before installing or servicing 
the SPD.

 

WARNING!: 

IMPORTANT SAFETY INSTRUCTIONS: All work must 
be performed by licensed and qualified personnel. 
Follow applicable electrical specifications for the 
country the unit is being used in.

 

WARNING!: 

Do not HIPOT the OVRHLD series units or the 
electrical system to which the OVRHLD series unit 
is connected without disconnecting the OVRHLD 
series units conductors including phases, neutral 
and ground.

Warning!  
lnstallation by person with electrotechnical 
expertise only.

Warnung!  
lnstallation nur durch elektrotechnische Fachkraft.

Avertissement! 
lnstallation uniquement par des personned 
qualifiées électrotechnique.

iAdvertencia!  

La instalación deberá ser realizada únicamente por 
electricistas especializados.

This manual provides guidelines for the proper 
installation of the OVRHLD series of devices. Proper 
product selection and compliance with these 
guidelines will help your new suppression system 
provide years of reliable service. If installers are 
unsure about the facility electrical configuration 
or have other installation-related questions, it 
is recommended they consult with a qualified 
electrical professional.

When shortcuts are taken or installation procedures 
are not followed, the OVRHLD series may become 
damaged or may not provide adequate protection. 
It is extremely important to follow these installation 
procedures carefully.

Guide to installation and assistance

Thank you for choosing the ABB OVRHLD series Surge Protective Device (SPD). 
We look forward to fulfilling your facilitywide surge protection needs.

Summary of Contents for OVRHLD Series









Reviews: