ABB OmniCore S Series, Operating Manual

Page: 35 / 236

Settings
The Settings application is used to configure the general settings of OmniCore
controller and FlexPendant. Controller configuration includes Network, ABB Ability,
Time and Language, Backup, Restore, System diagnostics and so on. FlexPendant
configuration includes background settings and programmable keys.
Program Pack-
age [3151-1]
Essential App
Package [3120-2]
Limited App
Package [3120-1]
Feature
✓ ✓ System
About, hardware devices, software
resources
✓ ✓ Network
Status, WAN settings, DNS Client
✓ ✓ Ability
Status, Ability status, configure
3G/WiFi/wired
✓ ✓ Configure Connected Services
✓ ✓ Backup and Recovery
Backup, restore, system dia-
gnostics, restart, reset user data,
RobotWare Installation Utilities
✓ ✓ Date & time
✓ ✓ Region & language
✓ ✓ Programmable keys
I/O
The I/O application is used to manage the I/O signals. Signals are configured with
system parameters.
Program Pack-
age [3151-1]
Essential App
Package [3120-2]
Limited App
Package [3120-1]
Feature
✓ ✓ Show industrial networks
✓ ✓ View all I/O signals
✓ ✓ Display I/O signals with respect to
category
✓ ✓ Filter signals
✓ ✓ Sort signals
✓ ✓ Set signals
✓ ✓ Bit values
✓ ✓ Navigate to device specific signals
✓ ✓ Identify device
✓ ✓ Scan EDS
✓ ✓ Activate and deactivate devices
✓ ✓ Start
✓ ✓ Scan
✓ ✓ Firmware upgrade
Continues on next page
Operating manual - OmniCore 35
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.2.3 FlexPendant applications
Continued