Manual | MNS-SG Operation and Maintenance 19
—
Packaging and handling
3.
Packaging and handling
3.1.
Standard packaging
MNS-products are shipped either in single cubicles or in
shipping units not exceeding 1.8 m for MNS UL switchgear
in length depending on the type of equipment installed and
on the space available for handing the unit at the erection
site.
If no special instructions are given by the customer, packing
is carried out based on this document and a suitable
method of shipping is selected.
Maximum size of a shipping unit
(length x width x height) in mm:
Packed in crate for one section from 600 mm up to1000 mm
-
83 in x 51 in x 101 in
(2107 mm x 1292 mm x 2576 mm) for 1852 mm depth
-
90 in x 51 in x 101 in
(2307 mm x 1292 mm x 2576 mm) for 2052 mm depth
Packed in crate for two sections up to 1400 mm
-
83 in x 63 in x 101 in
(2107 mm x 1608 mm x 2576 mm) for 1852 mm depth
-
90 in x 63 in x 101 in
(2307 mm x 1608 mm x 2576 mm) for 2052 mm depth
Packed in crate for three sections up to 1800 mm
-
83 in x 79 in x 101 in
(2107 mm x 2000 mm x 2576 mm) for 1852 mm depth
-
90 in x 79 in x 101 in
(2307 mm x 2000 mm x 2576 mm) for 2052 mm depth
Maximum size of a shipping unit (length x width):
Pallet dimensions for 1852 depth:
-
83 in x 51 in
(2107 mm x 1292 mm)
-
83 in x 63 in
(2107 mm x 1608 mm)
-
83 in x 79 in
(2107 mm x 2000 mm)
Pallet dimensions for 2052 depth:
-
90 in x 51 in
(2307 mm x 1292 mm)
-
90 in x 63 in
(2307 mm x 1608 mm)
-
90 in x 79 in
(2307 mm x 2000 mm)
Shipping pallet dimensions
Approximate values for weights per cubicle
