M
M
N
N
S
S
i
i
S
S
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
3
3
ABB MNS
i
S System Setup & Operation Quick Guide / System Release 6.0 – Rev.2 / Aug. 2011
5
5
7
7
5) The
operate view
is the main view for monitoring
and operating a starter module via its M
Control.
Use the green button “Show diagnostics” to change
between
measurement values
diagnostics (service information)
device status
Motors are started/ stopped using the blue buttons
at the bottom.
Press the button twice for
1.
Selection
(button changes colour from light to
dark blue, indicating “ready for activation”)
2.
Activation
(activates the required function)
Appearing alarms/trips are shown with red and blue
indicators next to the Alarms/trips window. Pushing
the red or blue button opens the alarm/trip view.
Figure 67 Operate view
6) A detailed
alarm/trip view
appears after pressing
the blue or red indicators in the Operate view (see
step 5). Time stamp relates to the last change of
M
Control
alarm/event information.
If the list extends the screen size, use “Up” and
“Down” buttons to scroll.
Use the yellow “Options” button to change between
indication of either
the complete alarms/events list (with active
alarms marked) or
only active alarms/events
Figure 68 Alarm/Trip View
No alarm no trip
Trip
Alarm
Alarm and Trip
Trip resettable (trip situation
removed)
Different alarm/trip and reset situations are
distinguished with a variety of indicators.
The system acts in accordance with the selected
reset parameters
for each drive and each single
protection function.
Trip acknowledged (trip will be reset
as soon as trip situation is removed)
