ABB-Welcome M
Operations
|
— 7 —
4.2
Settings
4.2.1
Ringtone type settings
Pos: 21 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/Be dienel eme nte - 8 322 0-AP-xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103 673 @ @ 1
1. Hold
"
+
" for about 3 seconds to enter the system setting mode (with
blue LED & red LED flashing simultaneously).
2. Press
to set the next ringtone type for the door bell.
3. Press
to set the next ringtone type for a call from an outdoor station.
4. Press
to set the next ringtone type for an intercom call from other apartments
or the guard unit.
5. Hold
"
+
" for about 3 seconds to save the selected ringtone type and
exit the system setting mode..
4.2.2
Default outdoor station settings
Pos: 21 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/Be dienel eme nte - 8 322 0-AP-xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103 673 @ @ 1
1.
Pickup the handset, hold
for about 3 seconds to enter the default outdoor
station setting mode.
2. Press
button to set the address of the default outdoor station. (the value is
indicated by the flash times of the red LED; it can be set from 1 to 9, default
setting: 1).
3. Hold
for about 3 seconds or put down the handset to save the setting and
exit the settings mode.
4.2.3
Programming the auxiliary buttons
Pos: 21 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/83 220 -AP-xxx/Be dienel eme nte - 8 322 0-AP-xxx @ 18\ mo d_1 3032 128 536 05_ 15.d ocx @ 103 673 @ @ 1
Each programmable button is available only after setting. These buttons can be
set for different functions, e.g. call guard unit, intercom call or controls switch
actuator.
1.
Enter the programming mode
Hold the programmable button for 3 seconds in the standby mode to enter the
programming mode.
2.
Set the function for each programmable button
Check the needed function, and press
to program the corresponding function
code which is indicated by the flash times of the blue LED.
●
The function code can be changed: 0->1->2->3->4->5->0.
