DATA MAPPING
DE FAU LT DATA M AP
1TG C908004M0 201
55
9.2.6. Switching Commands
The following table details the commands that are required from the Master (DCS / PLC) to
be sent to the M10x-M in order to control the motor or feeder module.
Operation
Type
Description
Modbus
Command
Remarks
Control Access
Remote control
0x2100
M10x-M
is
controlled
via DCS.
Bus-Local control
0x2104
DCS allows control via
local HMI.
Stop
Stop, Open
0x0201
Stops
the
M10x-M,
Opens contactor K1 for
Contactor Feeder ap-
plication
Start
Start CW
Close (CF)
Open (Act)
Start
Start Clockwise
Close for Contactor Feeder applica-
tion
Open for Actuator application
0x0202
Starts
the
M10x-M.
Close contactor K1
Start CCW
Close (Close)
Start Counterclockwise
Close for Actuator Application
0x0203
Start
the
M10x-M
Counterclockwise.
Close contactor K2.
Reset
Reset
0x1100
Reset of all trips
Table 28 Switching Commands sent from DCS to MNS Digital Gateway