ABB LineStrong2 Series, Original Instructions Manual

Page: 10 / 29

2TLC172248M0201, rev. C 10 www.abb.com/jokabsafety
2020-11-11
Double wire – LineStrong3D and 3DZ
With wire entries from both sides of the grab wire switch, LineStrong3D can be used for a long protection
length. LineStrong3D has a die-cast housing and is robust to manage severe indoor or outdoor use.
LineStrong3D is designed to protect a length up to 200 meters on a single switch. If several switches are
used together, it will be possible with a length up to 125 meters between the switches. A two colour LED
ensures switch status can be seen easily from a distance.
LineStrong3DZ has stainless steel 316 housing and is designed specifically to withstand the tough
environments found in the food and pharmaceutical industries. LineStrong3DZ is designed to protect a
length up to 200 meters on a single switch. If several switches are used together it will be possible with a
length up to 125 meters between the switches.
We recommend installing the eye bolts across the whole length of the rope between the switches at min.
2.5 m to max. 3 m. If this cannot be achieved, please see “Distance between eyebolts”.
Up to 125 m
Every 3 meter
Up to 125 m
Every 3 meter
Up to 100 m
Every 3 meter Up to 100 m
Every 3 meter
500 mm
500 mm
500 mm 500 mm
500 mm
500 mm 500 mm
500 mm 500 mm
Eyebolt
Eyebolt
Safety Spring
Safety Spring
1) Several LineStrong3D
2) LineStrong3D with safety springs
)
)