ABB JDF200, Operating Instruction

Page: 8 / 36

8 OI/JDF200-EN Rev. E | 2600T Series
4 Opening the box
Figure 2: Product identification
B
5 4 Opening the box
5.1 4.1 Identification
The instrument is identified by the plates shown below.
The Nameplate provides information concerning: product code, input signal, tag and product serial number (see Ref. A).
Please refer to this number when making enquiries.
The Safety Marking plate provides information of Ex protection; it is filled with necessary Ex information only when the indicator is required
for hazardous area installation (see Ref. B).
An additional nameplate is reporting a warning message for reference to the Operating Instruction (see Ref. C)
The optional, additional wired-on SST Tag plate (ref. C - code I2) can be filled with customized data.
JDF200 field indicator is in compliance with EMC 2014/30/UE.
The certification plate (ref.A) shown here is issued by ABB S.p.A, 22016 Tremezzina, Italy, with the numbers:
— IECEx ITS 16.0048X (for Ex ia, Ex d and Ex nA)
— ITS 16 ATEX 10165X (for Ex ia, Ex d)
— ITS 16 ATEX 10166X (for Ex nA)
A
5.2 4.2 Optional wired-on SST plate (I1)
The 266 transmitter can be supplied with the optional “Wired
On Stainless Steel plate” (figure 4) which is permanently laser
printed with a custom text specified in phase of order. The
available space consists in 4 lines with 32 characters per line.
The plate will be connected to the transmitter with a Stainless
Steel wire.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
Figure 4: 4-line layout of the optional wired-on Stainless Steel plate
5.3 4.3 Handling
The instrument does not require any special precautions during
handling although normal good practice should be observed.
5.4 4.4 Storage
The instrument does not require any special treatment if stored
as dispatched and within the specified ambient conditions.
There is no limit to the storage period, although the terms of
guarantee remain as agreed with the Company and as given in
the order acknowledgement.
Model JDF200 Storage temperature limits
With LCD –40 and 85 °C (–40 and 185 °F)
ABB S.p.A.
Lenno (Co) Italy
General Purpose IP67 ENCL Type 4X.
C