ABB IRB 365, Product Manual

Page: 39 / 240

Value Parameter
90% at constant temperature Maximum ambient humidity
Operating conditions, robot
The table shows the allowed operating conditions for the robot:
Value Parameter
0°C
i
Minimum ambient temperature
45°C Maximum ambient temperature
90% at constant temperature Maximum ambient humidity
i
At low environmental temperature < 10°C is, as with any other machine, a warm-up phase
recommended to be run with the robot. Below 5°C this warm-up phase is mandatory. Otherwise
there is a risk that the robot stops or run with lower performance due to temperature dependent
oil- and grease viscosity.
Protection classes, robot
The table shows the available protection types of the robot, with the corresponding
protection class.
Protection class
i
Protection type
IP54 Manipulator, protection type Standard
i
According to IEC 60529.
Environmental information
The product complies with IEC 63000. Technical documentation for the assessment
of electrical and electronic products with respect to the restriction of hazardous
substances
.
Product manual - IRB 365 39
3HAC079185-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
2 Technical data
2.1 Technical data
Continued