ABB IRB 2400/L, Product Manual

Page: 180 / 227

6 Reference information
6.6. Standard toolkit
3HAC022031-001 Revision: C 178
©
Co
py
rig
h
t 200
4-
200
8 ABB. All righ
ts reser
v
ed.
6.6. Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty Tool
1 Ring-open-end spanner 8-19 mm
1 Socket head cap 2.5-17 mm
1 Torx socket no: 20-60
1 Torque wrench 10-100 Nm
1 Small screwdriver
1 Plastic mallet
1 Ratchet head for torque wrench 1/2
1 KM socket (KM10) (6369901-480)
1 Socket head cap no: 5, socket 1/2" bit L 20 mm
1 Socket head cap no: 6, socket 1/2" bit L 20 mm
1 Socket head cap no: 8, socket 1/2" bit L 20 mm
1 Small cutting plier