manualshive.com logo in svg

ABB IP Touch 7, Manual, Page: 210 / 234

Share
Download
ABB IP Touch 7 Manual Download Page 210

 

Operation

 

 

 

 

 

 

Product manual 2CKA001473B5023 

│

210

 

Importing presence simulation into the favourites list (via timer list):

 

1.  Tap on the pen icon. 

 

 

 

2.  Tap on the 

heart icon

 next to the presence simulation in the list. 

 

 

 

 

– The 

heart icon

 is now displayed filled in. 

 

 

 

The presence simulation has been imported into the favourites list. Here it can be activated and 
deactivated. 

 

Exporting presence simulation to micro SD card (via timer list): 

1.  Tap on the pen icon. 

 

 

 

 

2.  Insert the micro SD card into the device (see chapter 4.6 “Inserting the micro SD card 

(SDHC)“ on page 218). 

3.  Tap on the card icon next to the presence simulation in the list. 

 

 

 

 

–  The presence simulation is exported to the micro SD card in CSV format. 
–  Via the data it can be determined whether the telegrams have been recorded. 

 

 

 

 

Summary of Contents for IP Touch 7











































































































































































































































Reviews:

No comments