ABB i-bus KNX IPS/S 3.5.1, Product Manual

Page: 9 / 30

ABB i-bus ® KNX
General
IPS/S 3.5.1 | 9AKK107680A8655 EN Rev. A 9
The power supply can be implemented via PoE (Power over Ethernet) according to IEEE 802.3af class 1
or via a supply voltage. If both options are connected simultaneously, PoE will be used.
The ABB i-bus
®
Tool, which is capable of detecting the Interface in the network (IP discovery), is available
for the IP Interface Secure (see chapter 4.2, The i-bus® Tool ).
An ETS app (ABB Firmware Update 2.0) is available for the firmware update. If KNX Secure mode is not
activated for the devices, a firmware update can also be performed with the i-bus ® Tool.
During the update process, the KNX bus (TP) must be connected in addition to the IP network (LAN).
Otherwise, the update process will fail.
It must be ensured that no voltage failure (KNX or IP) occurs during the update process, otherwise the
device can be destroyed.
1.8.1 Overview of versions
Device IPS/S 3.1.1 IPS/S 3.5.1
Application IP Interface/1.1
IP Interface
Secure/1.0
ETS from ETS 3 from ETS 5
Properties of the IP Interface
Number of tunneling servers 1 5
IP discovery (i-bus ® Tool)
 
Firmware update with i-bus ® Tool


*
Firmware update with ABB Firmware Update 2.0 -

Power over Ethernet
 
KNX Secure -

* Only if the device is not operated in KNX Secure mode