Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.7 Removing the cartridge group
© Copyright 2021 ABB. All rights reserved.
HZTL4037_EN
Rev.G
June 2021
Fig. 32: Removing the cartridge group (1)
1. Loosen the hexagon nuts (51007).
2. Remove hexagon nuts (51007), Verbus Ripp® washers (51003) and fastening
strips (51002).
3. Screw in the swivel lifting eye (S) up to the stop.
Removing the cartridge group
Fig. 33: Removing cartridge group 2
1. Insert screws from service support into cartridge group.
2. Secure ring nuts (VRM) onto the screws with washers.
3. Secure the lifting gear to the ring nuts and swivel lifting eye as shown.
4. Remove the cartridge group vertically from the turbine casing.
5. If present: Remove the metal C-ring (51105).
Page
78
/
109
