![background image](http://html1.mh-extra.com/html/abb/ht575363/ht575363_operation-manual_3441736107.webp)
Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.10 Installing the compressor casing
© Copyright 2017 ABB. All rights reserved.
HZTL4033_DE
Revision B
December 2017
Fitting the wall insert
Fig. 55: Fitting the wall insert
Part number
A170-M
A175-M
72011
M20
580 Nm
M24
1000 Nm
Table 37: Tightening torque (72011)
1. Remove lifting device (90190/90195).
2. Slide wall insert (77000) into compressor casing up to stop and remove guide stud
(90319).
3. Secure wall insert with screws (72011) and washers (72008).
For assembly of the alternative air inlet, see section
Removing / Installing air-inlets
.
Page
77
/
99