3.1
Disconnect the spring from the holder
3.2
Rotate the mechanism as far as the pin will be visible
3.5
Keep the spring for reassembly
3.6
Insert the screws item 1 and position the spring item
4 of Table 1
3.4
Remove the pins
3.3
Remove elastic rings (seeger)
3.1
3.2
3.5
3.
6
3.3
3.4
5
—
3. Instructions
It must be verified that the switch is in the open
position and that the cables to which the device
is connected are disconnected
DANGER
Operations:
replace the two pins with two screws
Note:
if the pins and the spring are not present,
you must start from STEP 3.6