Lifting Instructions - AKD6 Emax2 (3200A-4000A) Retrofill Breakers
B
Retrofill
Breaker
Fig. 6A
Fig. 6B
Fig. 6C
1. For A
se
KD6 AKR75/100 Emax4.2 Retrofill
, u
Breaker
lifting device A as shown in Table 2 along with a
for
ing.
suitable hoist
lift
2. Make sure the lifting device is secured and locked
with the hoist.
3. Lifting hooks (Item no.2, Table 2) can open in/out
within an angle of 7 in the vertical plane
± °
.
4. Lifting hooks can be engaged on the spreader bar
(Item no.1, Table 2) using any one of the two slots as per
the location of the hooking points in the Retrofill Breaker.
. Make sure that the
5
hooks are engaged in the slots
provided as shown in fig. 6C.
.
the
steady
6 While lifting hold
Retrofill Breaker
and
c
it
ontinue to guide , while checking both sides and
both
underneath, so that
sets of pins can be lowered
the
of AKD6 switchgear
and lined up easily with
rail slots
.
. Once the
is resting in the rail lots,
7
Retrofill Breaker
s
lifting hooks and m
unhook the
ove the hoisting apparatus
out of the way.
Lifting Instructions
* Refer Table 2
*
©2020 Lifting evices - Emax2 Retrofill ircuit reakers 00A-5000A
D
C
B
6
11
2TSA451029P0000 Rev-B
