6
EL6010 Gas Analyzer in Category 2G Operator’s Manual
42/24-30 EN Rev. 1
General Safety Precautions
Requirements for
Safe Operation
In order to operate in a safe and efficient manner, the EL6010 gas analyzer should
be properly handled and stored, correctly installed and set-up, properly operated
and carefully maintained.
Personnel
Qualifications
Only persons familiar with the installation, set-up, operation and maintenance of
comparable equipment and certified as being capable of such work should work
on the EL6010 gas analyzer.
Special Information
and Precautions
These include
•
The content of this operator’s manual.
•
The safety information affixed to the EL6010 gas analyzer.
•
Safety precautions for the installation and operation of electrical devices.
•
Safety precautions for working with gases, acids, condensates, etc.
•
Regulations, standards and guidelines for explosion protection.
National Regulations
The regulations, standards and guidelines cited in this operator’s manual are
applicable in the Federal Republic of Germany. The applicable national regulations
should be followed when the EL6010 gas analyzer is used in other countries.
EL6010 Gas Analyzer
Safety and Safe
Operation
The EL6010 gas analyzer is designed and tested in accordance with EN 60950 :
1992 / A11: 1997, “Safety of Information Technology Equipment” and has been
shipped ready for safe operation.
To maintain this condition and to assure safe operation, read and follow the safety
information identified with the
symbol in this operator’s manual. Failure to do so
can put persons at risk and can lead to EL6010 gas analyzer damage as well as
damage to other systems and instruments.
Additional
Information
If the information in this operator’s manual does not cover a particular situation,
ABB Service is prepared to supply additional information as needed.
Contact your local ABB service representative or
ABB Service, Telephone: +49-1 80-5-12 35 80, Fax: +49-6 21-3 81-51 35,
E-mail: [email protected]
