42/24-30 EN Rev. 1
EL6010 Gas Analyzer in Category 2G Operator’s Manual
51
Gas Analyzer Packing
CAUTION!
The EL6010-CU control unit weighs approx. 19 kg!
The EL6010-... analyzer unit weighs approx. 26 kg. Two persons are needed
for removal of the analyzer unit.
Step Action
1
Tightly seal the gas ports with plugs.
2
If the original packaging is not available, wrap the gas analyzer in
bubble foil or corrugated cardboard.
Place the gas analyzer in an adequately sized box lined with cushion-
ing material (foam or similar substance).
3
The cushioning material’s thickness should be adequate for the
gas analyzer’s weight.
Packing
4
Mark the box as “Fragile Material”.
Step Action
Place the gas analyzer in a 0.2-mm thick polyethylene bag, add a
drying agent (such as silica gel) and seal the bag air-tight.
1
Use an amount of drying agent appropriate for the package
volume and the planned shipping schedule (at least 3 months).
Additional Steps when
Shipping Overseas
2
Also wrap the box in a layer of protective waterproof wrapping.
Ambient Temperature
Ambient temperature during storage and transport: –25 to +65 °C
When returning the analyzer unit to the service department, e.g. for repair, please
indicate which gases have been supplied to the analyzer unit. This information is
needed so that service personnel can take any safety precautions required for
harmful gases.
