ABB DressPack IRB 6620, Product Manual

Page: 259 / 290

6 Reference information
6.6. Toolkits, DressPack/SpotPack
257 3HAC027309-001 Revision: D
©
Co
py
rig
h
t 200
6-
201
0 ABB. All righ
ts reser
v
ed.
6.6. Toolkits, DressPack/SpotPack
General
All service (repair, maintenance and installation) instructions contain lists of tools required to
perform the specified activity. All special tools, that is all tools that are not considered
standard as defined below, are listed in their instructions respectively.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Standard toolkit
This standard toolkit contains a set of standard tools used for DressPack/SpotPack,
3HAC17290-7.
Toolkit, water panel
This toolkit contains tools needed for water panel:
Toolkit, cables
This toolkit contains tools needed for work with cables:
Qty Art. no. Tool Note
1 - Socket head cap, 5-17mm -
1 - Torx socket no: 20-60 -
1 - Phillips screwdriver, small For Harting connectors
1 - Flat screwdriver, medium For Harting connectors
2 - Ring-open-end spanner 8-19 mm For water connectors on water
and air unit
1 - Open end wrench, 27 mm. For Tension arm unit and water
connectors on DressPack
1 - Open end wrench, 36 mm For water connectors on
DressPack
Qty Art.no. Tool Note
1 - Socket head cap 4 mm For water panel
2 - Ring-open-end spanner, 36 mm For water panel
Qty Art.no Tool Note
1 0999 000 0171 (D-
sub) Removal and Insertion tool for pins and
sockets Art. no. from Harting
1 0999 000 0012
(HAN DD) Removal tool for pins and sockets Art. no. from Harting
1 0999 000 0319
(HAN EE) Removal tool for pins and sockets Art. no. from Harting
1 0999 000 0059
(HAN DD and
HAN EE) Insertion tool for pins and sockets Art. no. from Harting
1 - Stripping pliers
1 09 99 000 0021 Crimping tool HARTING with locator Art. no. from Harting
Continues on next page