manualshive.com logo in svg

ABB Discrete I/O, Applications Manual

Introducing ABB Discrete I/O - an efficient, versatile product offering seamless integration in industrial applications. Accelerate your understanding and leverage its capabilities with our comprehensive Applications Manual, available for free download at manualshive.com. This manual empowers users with in-depth insights to optimize productivity and maximize the potential of this innovative product.

Share
Download
background image

2.1.3 Installing add-on devices

General

Add-on devices have an optical interface and must be powered and attached to a
configured base device to be detected by the robot controller. Up to four add-on
devices can be attached to the same base device with maintained performance.

The optical interface on the base device is powered by process power supply and
must also be connected to detect the add-on device. Unpowered add-on devices
shall be placed last, i.e. to the right, otherwise the optical link is broken.

xx1600002032

Installing add-on devices

Note

Action

DANGER

Before commencing any work inside the cabinet
make sure that the main power has been switched
off.

1

xx1700000277

Clean the optical interface on both the base device
and the add-on from dirt or dust using a soft cloth.

2

Continues on next page

Application manual - Discrete I/O

21

3HAC070208-001 Revision: C

© Copyright 20192020 ABB. All rights reserved.

2 Hardware overview

2.1.3 Installing add-on devices

Summary of Contents for Discrete I/O



























































Reviews:

No comments

Related manuals for Discrete I/O

GEA T.VIS P-15 Operating Instruction preview
T.VIS P-15
Brand: GEA Pages: 66
OBSIDIAN CONTROL SYSTEMS NX4 Installation Manual preview
NX4
Brand: OBSIDIAN CONTROL SYSTEMS Pages: 13
RAM Trus-T-Lift Installation Manual preview
Trus-T-Lift
Brand: RAM Pages: 32
Yamaha CBX-D5 Troubleshooting Manual preview
CBX-D5
Brand: Yamaha Pages: 4
CAME BPT XTS 5IP WH Installation And Setting Manual preview
XTS 5IP WH
Brand: CAME BPT Pages: 16
Waterous AQUIS ULTRAFLOW Installation, Operation And Maintenance Manual preview
AQUIS ULTRAFLOW
Brand: Waterous Pages: 217
Keurig Vue V1255 Quick Start Manual preview
Vue V1255
Brand: Keurig Pages: 2
DIG LEIT X Series Instruction Manual preview
LEIT X Series
Brand: DIG Pages: 28
XtendLan DPM-D2101TMD User Manual preview
DPM-D2101TMD
Brand: XtendLan Pages: 12
WaterUps Corro Wicking Bed Assembly Manual preview
Corro Wicking Bed
Brand: WaterUps Pages: 3
YASKAWA SLIO Manual preview
SLIO
Brand: YASKAWA Pages: 116
Rain Bird isa 300/400 Installation, Programming, And Operation Manual preview
isa 300/400
Brand: Rain Bird Pages: 45
Nikkei NMD315 User Manual preview
NMD315
Brand: Nikkei Pages: 28
Dahua DH-VTH111 Series Quick Start Manual preview
DH-VTH111 Series
Brand: Dahua Pages: 12
Instron Torsion Add-on Version 3 Operator'S Manual preview
Torsion Add-on Version 3
Brand: Instron Pages: 32
aija audio SUB LP210A User Manual preview
SUB LP210A
Brand: aija audio Pages: 4
Ravaglioli KP1394 Manual preview
KP1394
Brand: Ravaglioli Pages: 60
M&S Systems VMC1 Instructions Manual preview
VMC1
Brand: M&S Systems Pages: 24

Brands by name

Popular brands

Load more brands