ABB DCS550 Series, Manual

Page: 213 / 316

213
Signal and parameter list
3ADW000379R0501 DCS550 Manual e e
Signal / Parameter name
m
in.
ma
x.
def
.
uni
t
24.28 TiS2 (2
nd
i-part speed controller)
2
nd
integral time of the speed controller can be released by means of Par2Select (24.29).
Int. Scaling: 1 == 1 ms
Type: I Volatile: N
0 64000 2500 ms
24.29 Par2Select (selector for 2
nd
set of speed controller parameters)
Select active speed controller parameters:
0 = ParSet1
parameter set 1 [KpS (24.03) and TiS (24.09)] is active, default
1 = ParSet2 parameter set 2 [KpS2 (24.27) and TiS2 (24.28)] is active
2 = SpeedLevel If |MotSpeed (1.04)|
≤
|SpeedLev (50.10)|, then parameter set1 is active.
If |MotSpeed (1.04)| > |SpeedLev (50.10)|, then parameter set 2 is active.
3 = SpeedError If |SpeedErrNeg (2.03)|
≤
|SpeedLev (50.10)|, then parameter set1 is active.
If | SpeedErrNeg (2.03)| > |SpeedLev (50.10)|, then parameter set 2 is active.
4 = DI1 0 = parameter set 1 is active, 1 = parameter set 2 is active
5 = DI2 0 = parameter set 1 is active, 1 = parameter set 2 is active
6 = DI3 0 = parameter set 1 is active, 1 = parameter set 2 is active
7 = DI4 0 = parameter set 1 is active, 1 = parameter set 2 is active
8 = DI5 0 = parameter set 1 is active, 1 = parameter set 2 is active
9 = DI6 0 = parameter set 1 is active, 1 = parameter set 2 is active
10 = DI7 0 = parameter set 1 is active, 1 = parameter set 2 is active
11 = DI8 0 = parameter set 1 is active, 1 = parameter set 2 is active
12 = DI9 0 = parameter set 1 is active, 1 = parameter set 2 is active, only available with digital
extension board
13 = DI10 0 = parameter set 1 is active, 1 = parameter set 2 is active, only available with digital
extension board
14 = DI11 0 = parameter set 1 is active, 1 = parameter set 2 is active, only available with digital
extension board
15 = MCW Bit11 0 = parameter set 1 is active, 1 = parameter set 2 is active, MainCtrlWord (7.01) bit 11
16 = MCW Bit12 0 = parameter set 1 is active, 1 = parameter set 2 is active, MainCtrlWord (7.01) bit 12
17 = MCW Bit13 0 = parameter set 1 is active, 1 = parameter set 2 is active, MainCtrlWord (7.01) bit 13
18 = MCW Bit14 0 = parameter set 1 is active, 1 = parameter set 2 is active, MainCtrlWord (7.01) bit 14
19 = MCW Bit15 0 = parameter set 1 is active, 1 = parameter set 2 is active, MainCtrlWord (7.01) bit 15
Note:
Load and speed dependent adaptation parameters are valid regardless of the selected parameter set.
Int. Scaling: 1 == 1
Type: C Volatile: N
Pa
rSe
t1
M
C
W
B
it
15
Pa
rSe
t1
Group 25: Torque reference
25.01 TorqRefA (torque reference A)
External torque reference in percent of MotNomTorque (4.23). TorqRefA (25.01) can be scaled by LoadShare
(25.03).
Note:
TorqRefA (25.01) is only valid, if TorqRefA Sel (25.10) = TorqRefA2501.
Int. Scaling: 100 == 1 % Type: SI
Volatile: Y
-325 325 0 %
25.02 Unused
25.03 LoadShare (load share)
Scaling factor TorqRefA (25.01).
Int. Scaling: 10 == 1 %
Type: SI Volatile: N
-400 400 100 %
25.04 - 24.09 Unused
25.10 TorqRefA Sel (torque reference A selector)
Selector for TorqRefExt (2.24):
0 = TorqRefA2501 TorqRefA (25.01), default
1 = AI1
analog input AI1
2 = AI2 analog input AI2
3 = AI3 analog input AI3
4 = AI4 analog input AI4
5 = AI5 analog input AI5
6 = AI6 analog input AI6
Int. Scaling: 1 == 1 Type: C Volatile: N
T
or
qR
ef
A
2
501
AI
6
T
or
qR
ef
A
2
501
-