Page 1
© 2023 ABB. All rights reserved.
CPS6000_Series II External Distribution_QSG
Version 2.0
Document –
850025053
CPS6000 Power System
•
Wire cutters and strippers
•
Digital meter, +/
-
0.02%
•
5/16”
and
3/8”
nut drivers and sockets
•
Heat shrink gun
•
Screw Drivers (#1 and #2 Phillips)
•
Torque wrench (0
-
240 in
-
lb / 28 Nm)
•
Cable crimpers
Information – Tools Required
For systems with rear access AC terminal box.
The shelf is installed with a minimum gap of 3/4 inch below the system to allow proper airflow. Attach the CPS
shelf to the frame using a minimum of twelve (six on each side) of the 12
-
24 screws included with the shelf.
QUICK START GUIDE
