ControlMaster CM30, CM50 and CMF310
Universal process controllers,
1
/
4
,
1
/
2
DIN and fieldmount
7 Advanced Level
34
IM/CM/ED–EN Rev. X
7 Advanced Level
7.1 Device Setup
Provides access to standard setup parameters to determine the type of
control / indication required. Also provides the ability to create non-standard
configurations for special application requirements.
Initial Setup
App Template
Application templates enable standard configurations for particular applications to be
created as simply as possible. When a template is selected, the controller assumes the
preset form for that template. The inputs and function blocks are
soft-wired automatically to perform the selected function.
See Section 8, page 88 for templates available to Extended and Dual functionality
controllers.
Loop 1 (2) Output Type
The appropriate output function block, relay, digital and analog outputs are configured
and soft-wired.
Loop 2 Output Type
is available only if a
Dual Loop
application template is selected –
see Section 8, page 88 for template details.
See Appendix D, page 109 for output assignments.
Loop 1 (2)
S
plit O/P
Loop 1 Split O/P
is available only if the
Loop 1 Output Type
is
Split Output
.
Loop 2 Split O/P
is available only if a
Dual Loop
or
Cascade
application template is
selected and the
Loop 2 Output Type
is
Split Output
.
These types of outputs split the
Control (PID)
output signal (see page 30) into 2 signals.
The linear relationship between the PID O/P and the 2 outputs can be configured in the
Control
configuration – see page 46.
See Appendix D, page 109 for output assignments.
Instrument Tag
A 16-character alphanumeric tag, displayed in the title bar on
Operator
pages – see
page 23.
Loop 1 (2) Tag
Available only if a
Cascade
or
Dual Loop
application template is selected – see Section
8, page 88 for template details.
The tag is displayed in
Operator
pages – see page 23.
Mains Freq
Used to set the internal filters to reduce mains power frequency interference.
Menu
Device Setup
Exit
Select
