GOOSE Tester Manager
6.
Using GOOSE Tester Manager
6.1.
GOOSE Tester Manager enables capturing raw GOOSE packets and associated events
into a single record, and presenting graphical and system-oriented views of the recorded
information.
To start the GOOSE Tester Manager, click on GOOSE Tester Manager on the menu
bar. The Tester Manager page opens (see Figure 6.1-1).
GOOSETester.png
Figure 6.1-1 Main view of GOOSE Tester Manager
On the left side of the Tester Manager, you can see the list of all test cases. Each test
case can be activated to capture the defined GOOSE packets as well as their associated
events. At the bottom of the left panel, you can see the disk consumption of the generated
test records on the Server side. When the disk is almost full, an empty record file with
zero packet & event will be generated. It occupies about 4 KB of the server's disk. When
there is no space left for the empty record file, no records can be generated.
To remove all test records, click Clear. To remove single test cases, select a test case
and click Remove.
To create a configuration, click New.
27
COM600 series 5.0
1MRS757546
GOOSE Analyzer Operator's Manual
