ABB COM600 3.4 User Manual Download

Page: 53 / 82

Event_Log101.jpg

Figure 4.3-2 Event log file

IEC101 Channel diagnostics

4.4.

The IEC101Channel activity can be monitored with the Online diagnostics function.

You can also take a channel into use or out of use as described in this section.

To monitor and control IEC101 Channel activity:
1.

Select the channel you want to monitor in the object tree of SAB600.

Right-click the channel.

Select Online diagnostics.

IEC101_Channel _Online_Diagnostics.jpg

Figure 4.4-1 IEC101 Channel Online Diagnostics

In the Diagnostic counters field, you can monitor the channel activity. The available
attributes can be seen in Figure 4.4-1. To reset Diagnostic counters, click Reset counters.

Station Automation COM600 3.4

1MRS755382

IEC 60870-5-101 Slave (OPC) User's Manual

Summary of Contents for COM600 3.4



















































































Search results

Summary of Contents for COM600 3.4

Reviews:

Related manuals for COM600 3.4

Brands by name

Popular brands

ABB COM600 3.4, User Manual

Search results

Summary of Contents for COM600 3.4

Reviews:

Related manuals for COM600 3.4

Brands by name

Popular brands