manualshive.com logo in svg

ABB CMS-700, User Manual

Share
Download
ABB CMS-700 User Manual Download Page 44

CMS-700 SYSTEM 

CIRCUIT MONITORING SYSTEM (CMS)

43

—

WEB UI - Settings Menu

— 

Settings Menu - Other / Time

It is possible to synchronize the time to compare the one referred to the device and the one referred to 
the web browser. The synchronization is mandatory in order to visualize and store data. The CMS will 
synchronizes with the computer system time. 

It is also possible to manually set the time. In Google Chrome and Opera web browsers please push the 
down arrow for date selection using calendar while in other web browsers please enter the date directly 
in the input field.

If an NTP Server is available you can set the IP address (Time Server 1, Time Server 2) for automatic  
time synchronization. In this case, the synchronization procedure can take up to 10 minutes.

Check the internal time of the device. If it is not correct. it has to be set manually.
Once date and time are set, it is not possible to change them without corrupting the database..

Summary of Contents for CMS-700


































































Reviews:

No comments

Brands by name

Popular brands

Load more brands