ABB ABILITY™ SMART SENSOR BLUETOOTH® GATEWAY
DOCUMENT ID
REV.
DATE
LANG.
PAGE
9AKK107046A4620
L
August 2022
EN
5/29
© Copyright 2021 ABB. All rights reserved.
-
Mobile network needs to have adequate signal strength. In the most demanding
locations,
an extension USB cable or external antenna might be needed for the USB
modem/dongle.
Power supply:
-
In case PoE network is not available, a PoE injector (power supply) is needed.
-
PoE is 802.3af/at compliant.
-
Recommended PoEs
:
o
Procet PT-PSE104GO-30-5, Indoor PoE Injector
o
Procet PT-PSE108GBR-OT, Outdoor PoE Injector
Ethernet cable:
-
1 CAT6 shielded Ethernet cable (RJ45), with a length of 50 meters maximum, is
needed for PoE, while WIFI or mobile network is
used.
-
2 CAT6 shielded Ethernet cables (RJ45), with a length of 50 meters maximum, are
needed when LAN/Ethernet network is used.
Computer:
-
A computer with WIFI adapter is needed for gateway configuration. A tablet
computer or mobile phone can also be used.
-
Google Chrome web browser is recommended to be used.
USB Cellular Modem / Dongle
-
The gateway has built in drivers for several USB dongles. For the list of supported
dongles please check the section 2.7 USB mobile dongle connection.
-
A SIM card with Internet data plan.
-
The gateway also supports the use of any USB powered WIFI modems.
Mounting:
-
Flat head screwdriver for pole mounting.
-
Phillips head screwdriver and a drill (if needed) for wall mounting.
-
Mounting is not mandatory, but it is recommended to secure the gateway
somehow to its intended place.
