Operating Instructions
Busch-Welcome
®
Configuration
Operating Instructions | 1473-1-8354
— 14 —
Pos: 36 /#Neustruktur#/Online-Dokumentation (+KNX)/Überschriften (--> Für alle Dokumente <--)/2. Ebene/G - L/Konfigurationsseite „Netzwerkkonfiguration" @ 34\mod_1362494753800_15.docx @ 284613 @ 222222222222222222222222222211111111111111111111111111111111111111111111111111111111111111111111111111111111212221111111 @ 1
6.4
"Network configuration" page
Pos: 37 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/Türkommunikation/Busch-Welcome/Menü Netzwerkkonfiguration - 83341 @ 36\mod_1370935504989_15.docx @ 296854 @ 212111112333333333111111122212111111111111111111111111111113333333333333333333333333333333333333333333333333333333333333111111111111111111 @ 1
Fig. 6:
"Network configuration" page
You can configure your device as required on the "Network configuration" page.
DHCP
Select "DHCP" if the device is to automatically obtain an IP address.
Static IP address
Please note that the IP address of the gateway does not change when a static address is assigned. A static IP
address only needs to be assigned in exceptional cases to manually configure the network. Click the "Static IP
address" check box to enter the following addresses:
The following option is also available:
External IP / hostname
Enter the DynDNS address for access via the Internet or from other networks.
Proceed as follows::
To access the IP gateway from the Internet or other networks (changing IP addresses), the hostname has to be
converted to the current IP address.
Note
In this case, there must be an account for a DynDNS provider (DDNS provider).
1.
Enter the specified DynDNS address in the "
External IP / Hostname
" field.
2.
Set up forwarding for ports 50600 - 50700 (TCP and UDP) in your router as shown in the example.
