ABB BullsEye, Applications Manual

Page: 68 / 90

6.2.2 BEDebugState - Debug state control
Usage
BEDebugState
is used to control the debug log detail level. Normally only limited
information in stored in the BullsEye log files. With this instruction, more detailed
information is recorded to help advanced users determine the cause of an error.
This instruction is hidden from the IPL.
Basic examples
BEDebugState\On;
Turns on the debugging flag.
BEDebugState\Off;
Turns off the debugging flag.
Arguments
BEDebugState [\On] [\Off]
[\On]
Data type:
switch
Used to turn on debugging.
[\Off]
Data type:
switch
Used to turn off debugging.
Program execution
The instruction should be placed before BullsEye instructions. The log files affected
are called
BE_Oper.log
and
BE_Init.log
and are found in the folder
TEMP
.
Syntax
BEDebugState
[ '\' On ] < switch >
[ '|' Off ] < switch > ';'
Related information
Described in:
BECheckTcp - BullsEye check TCP on page 65 BECheckTcp
BEUpdateTcp - BullsEye update TCP on page 79 BEUpdateTcp
BESetupToolJ - BullsEye setup tool joint move on page 72 BESetupToolJ
68 Application manual - BullsEye
3HAC050989-001 Revision: C
© Copyright 2004-2018 ABB. All rights reserved.
6 RAPID reference
6.2.2 BEDebugState - Debug state control