ABB Aztec 600, User Manual

Page: 93 / 109

Aztec 600 aluminium, ammonia, color, iron, manganese, phosphate
Single- and multi-stream colorimetric analyzers Appendix D – Web Server
90 IM/AZT6CR–EN Rev. J
Appendix D – Web Server
The analyzer is fitted with an ethernet card as standard and,
when the appropriate configuration settings have been made,
users can access the analyzer's data via an Ethernet network.
In addition, files can be transferred to and from the analyzer via
an FTP connection.
a Log On – click to log on to the analyzer to enable
configuration access (displayed only if the analyzer is
configured for FTP access – see Section 6.7.1, page 39).
b Analyzer View – displays the current screen of the
analyzer. If the analyzer has a screen-saver set, it does not
affect this view.
c Access Buttons – provides access to the analyzer's data
if the user has the appropriate access permission.
– Stream Values – see Appendix D.1, page 90
– Operate – see Appendix D.2, page 91
– Monitor Status – see Appendix D.3, page 91
– Statistics – see Appendix D.4, page 91
– Logging Status – see Appendix D.5, page 91
– Operator Message – see Appendix D.6, page 91
– Configuration – see Appendix D.7, page 92
d Language Selection – selects the language for the web
pages.
e Auto-Refresh – updates the analyzer view automatically.
f View Selection – selects the required analyzer view:
– Alarm / Event Log
– Audit Log
– Chart View
– Bar View
D.1 Stream Values
Fig. D.1 Web Server Screen
1
3
4
5 6
2