34
AW T4 20 |
U N I V ER S A L 4 - W I R E , D UA L- I N P U T T R A N SM I T T ER | O I/AW T4 2 0 - EN R E V. B
12 Display icons
Diagnostic icons
NOTICE
• When a diagnostic condition is detected, the associated
NAMUR icon, plus the highest priority diagnostic
message, is displayed in the
Status Bar
when the
transmitter is in
Operator View
mode – refer to page
83 for diagnostic messages.
• If the status bar displays a diagnostic message, press
the key to see all diagnostic messages.
NAMUR icons
Diagnostic icon – Out of Specification.
Diagnostic icon – Maintenance Required.
Diagnostic icon – Failure.
Diagnostic icon – Check Function.
Alarm, hold, and clean icons
Alarm – indicates a user-defined alarm condition
(20-character) and flashes intermittently with an associated
NAMUR diagnostic icon.
Hold – indicates that alarms/analog outputs are in a manual
hold state.
Cleaning – indicates that a manual or automatic clean is in
progress.
Title bar icons
Media on-line: 0 to <20 % full.
Media on-line: 20 to <40 % full.
Media on-line: 40 to <60 % full.
Media on-line: 60 to <80 % full.
Media on-line: 80 to <100 % full.
Media on-line: full (icon toggles when full).
Media off-line: 0 to <20 % full.
Media off-line: 20 to <40 % full.
Media off-line: 40 to <60 % full.
Media off-line: 60 to <80 % full.
Media off-line: 80 to <100 % full.
Media off-line: not inserted (not logging).
Attempt to datalog/go online with no card fitted.
Any alarm is active.
Bluetooth: not connected/connected.
