ARG600/ARR600 |
Quick Start Guide 3
Getting started
Wireless network settings
Log in to the Arctic Web user interface using your Web
browser.
Navigate to
Network
→
Mobile WAN
.
Change the APN type from ”Automatic” to ”Manual”.
Set the Access Point Name (APN) appropriately (usually
INTERNET or operatorname.com). As this setting depends on
your mobile operator, ensure the APN settings directly from
the operator.
Complete customer documentation is available in the product pages that can be accessed through
www.abb.com/mediumvoltage
Figure 3. Mobile WAN settings
Set the other settings such as the PIN code, authentication,
username and password if required by the operator’s
subscription.
Reboot the Arctic device and check the settings and the
cellular network connection status from
System
→
Status
.
