![background image](http://html1.mh-extra.com/html/abb/acsm1-series/acsm1-series_hardware-manual_3346607017.webp)
About this manual
17
Installation and commissioning flowchart
Task
See
Identify the frame size of your drive: A, B, C or D.
(page
)
Plan the installation.
Check the ambient conditions, ratings, required
cooling air flow, input power connection, compatibility
of the motor, motor connection, and other technical
data.
Select the cables.
(page
Planning the electrical installation
(page
(page
Option manual (if optional equipment is
included)
Unpack and check the units.
Check that all necessary optional modules and
equipment are present and correct.
Only intact units may be started up.
:
(page
If the converter has been non-operational for
more than one year, the converter DC link
capacitors need to be reformed. Ask ABB for
more information.
Check the installation site.
(page
(page
If the drive is about to be connected to an IT
(ungrounded) system, check that the screw(s)
labelled VAR are removed. Also note that using a
mains filter is not allowed in an IT (ungrounded]
system.)
:
(page
Install the drive in a cabinet.
:
(page
Route the cables.
Planning the electrical installation
(page
Check the insulation of the supply cable, the motor
and the motor cable, and the resistor cable (if
present).
(page
Summary of Contents for ACSM1 Series
