About this manual
15
About this manual
What this chapter contains
This chapter describes the intended audience and contents of this manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.
Compatibility
The manual is compatible with ACSM1-04 (frame sizes A to D).
Intended audience
This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown
wherever appropriate.
Categorization according to the frame size
Some instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size A, B, C or D. The
frame size is not marked on the drive designation label. To identify the frame size of
your drive, see the rating tables in chapter
Categorization according to the + code
The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with + codes, e.g. +L500. The options
included in the drive can be identified from the + codes visible on the type
designation label of the drive. The + code selections are listed in chapter
under
.
Summary of Contents for ACSM1 Series
