![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539378.webp)
378 Parameters
Displays the data to be sent onto the master/follower link as
word 1 as an integer.
If no data has been preselected by
, the value to be sent can be written directly into this
parameter.
0
0…65535
Data to be sent as word 1 in master/follower communication.
Displays the data to be sent onto the master/follower link as
word 2 as an integer.
If no data has been preselected by
, the value to be sent can be written directly into this
parameter.
0
0…65535
Data to be sent as word 2 in master/follower communication.
Displays the data to be sent onto the master/follower link as
word 3 as an integer.
If no data has been preselected by
, the value to be sent can be written directly into this
parameter.
0
0…65535
Data to be sent as word 3 in master/follower communication.
…
preselect data to be sent in data
sets 2 and 4 to the external controller. These data sets are
used in ModuleBus communication with a “standard drive”
(
).
…
display the data to be sent to the
external controller. If no data has been preselected, the value
to be sent can be written directly into these parameters.
For example, this parameter preselects the data for word 1 of
data set 2. Parameter
displays
the selected data in integer format. If no data is preselected,
the value to be sent can be written directly into parameter
.
None
None.
0
CW 16bit
Control Word (16 bits)
1
SW 16bit
Status Word (16 bits)
4
Act1 16bit
Actual value ACT1 (16 bits)
5
Act2 16bit
Actual value ACT2 (16 bits)
6
). -
Preselects the data to be sent as word 2 of data set 2 to the
external controller.
See also parameter
.
For the selections, see parameter
See parameter
.
…
…
…
…
See parameter
.
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
