ABB ACS880 Series, Firmware Manual

Page: 506 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
22582 Scaled velocity value as displayed by 88.54 D2D velocity
send.
Note: Occasionally, below data are also sent to the
follower:
• 32768-Position initialization or position send type
changed.
• 32767-Latch 1 triggered in master.
Follower CW B6 high
See Terms and abbreviations (page 169) . Other [value]
Used speed reference
/ uint32 Preselects the data to be sent as word 2 onto the
master/follower link.
See also parameter
61.26 M/F data 2 value .
For the selections, see parameter 61.1 M/F data 1
selection .
M/F data 2 selection 61.2
Torque reference act
5 / uint32 Preselects the data to be sent as word 3 onto the
master/follower link.
See also parameter
61.27 M/F data 3 value .
For the selections, see parameter 61.1 M/F data 1
selection .
M/F data 3 selection 61.3
- / uint16 Displays the data to be sent onto the master/follower
link as word 1 as an integer.
If no data has been preselected by
61.1 M/F data 1
selection , the value to be sent can be written directly
into this parameter.
M/F data 1 value 61.25
- / - Data to be sent as word 1 in master/follower
communication. 0...65535
- / uint16 Displays the data to be sent onto the master/follower
link as word 2 as an integer.
If no data has been preselected by
61.2 M/F data 2
selection , the value to be sent can be written directly
into this parameter.
M/F data 2 value 61.26
- / - Data to be sent as word 2 in master/follower
communication. 0...65535
- / uint16 Displays the data to be sent onto the master/follower
link as word 3 as an integer.
If no data has been preselected by
61.3 M/F data 3
selection , the value to be sent can be written directly
into this parameter.
M/F data 3 value 61.27
- / - Data to be sent as word 3 in master/follower
communication. 0...65535
506 Parameters