ABB ACS880 Series, Firmware Manual

Page: 485 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
0 Type/source and scaling follow the type of reference
1 selected by parameter
58.26 EFB ref1 type . See the
individual settings below for the sources and scalings.
Auto
1 The value selected by parameter 58.31 EFB act1
transparent source is sent as actual value 1. No scaling
is applied (the 16- bit scaling is 1 = 1 unit).
Transparent
2 The value selected by parameter 58.31 EFB act1
transparent source is sent as actual value 1 with a 16-bit
scaling of 100 = 1 unit (ie. integer and two decimals).
General
3 1.10 Motor torque is sent as actual value 1. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 1. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 1. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
6 Motor position is sent as actual value 1. See parameter
90.6 Motor position scaled .
Position
Torque / uint16 Selects the type/source and scaling of actual value 2
transmitted to the fieldbus network through the
embedded fieldbus interface. EFB act2 type 58.29
0 Type/source and scaling follow the type of reference
2 selected by parameter
58.27 EFB ref2 type . See the
individual settings below for the sources and scalings.
Auto
1 The value selected by parameter 58.32 EFB act2
transparent source is sent as actual value 2. No scaling
is applied (the 16- bit scaling is 1 = 1 unit).
Transparent
2 The value selected by parameter 58.32 EFB act2
transparent source is sent as actual value 2 with a 16-bit
scaling of 100 = 1 unit (ie. integer and two decimals).
General
3 1.10 Motor torque is sent as actual value 2. The scaling
is defined by parameter 46.3 Torque scaling .
Torque
4 1.1 Motor speed used is sent as actual value 2. The
scaling is defined by parameter 46.1 Speed scaling .
Speed
5 1.6 Output frequency is sent as actual value 2. The
scaling is defined by parameter 46.2 Frequency scaling .
Frequency
6 Motor position is sent as actual value 1. See parameter
90.6 Motor position scaled .
Position
Not selected / uint32 Selects the source of the status word when 58.25
Control profile is set to Transparent .
EFB status word
transparent source 58.30
0 None. Not selected
See Terms and abbreviations (page 169) . Other [value]
Not selected / uint32 Selects the source of actual value 1 when 58.28 EFB act1
type is set to Transparent or General .
EFB act1 transparent
source 58.31
0 None. Not selected
See Terms and abbreviations (page 169) . Other [value]
Parameters 485