ABB ACS880 Series, Firmware Manual

Page: 430 / 764

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
2 Digital input DI1 ( 10.2 DI delayed status , bit 0). DI1
3 Digital input DI2 ( 10.2 DI delayed status , bit 1). DI2
4 Digital input DI3 ( 10.2 DI delayed status , bit 2). DI3
5 Digital input DI4 ( 10.2 DI delayed status , bit 3). DI4
6 Digital input DI5 ( 10.2 DI delayed status , bit 4). DI5
7 Digital input DI6 ( 10.2 DI delayed status , bit 5). DI6
10 Digital input/output DIO1 ( 11.2 DIO delayed status , bit
0).
DIO1
11 Digital input/output DIO2 ( 11.2 DIO delayed status , bit
1).
DIO2
See Terms and abbreviations (page 169) . Other [bit]
0.0 / real32 Defines the start limit for the sleep function when
parameter
40.41 Set 1 sleep mode is set to Internal .
Set 1 sleep level 40.43
1 = 1 / 10 = 1 Sleep start level. 0.0 ... 32767.0
60.0 s / real32 Defines a delay before the sleep function actually
becomes enabled, to prevent nuisance sleeping.
The delay timer starts when the sleep condition
selected by parameter
40.41 Set 1 sleep mode becomes
true, and resets if the condition becomes false.
Set 1 sleep delay 40.44
1 = 1 s / 10 = 1 s Sleep start delay. 0.0 ... 3600.0 s
0.0 s / real32 Defines a boost time for the sleep boost step. See
parameter
40.46 Set 1 sleep boost step .
Set 1 sleep boost
time 40.45
1 = 1 s / 10 = 1 s Sleep boost time. 0.0 ... 3600.0 s
0.0 / real32 When the drive is entering sleep mode, the process
setpoint is increased by this value for the time defined
by parameter
40.45 Set 1 sleep boost time .
If active, sleep boost is aborted when the drive wakes
up.
Set 1 sleep boost
step 40.46
1 = 1 / 10 = 1 Sleep boost step. 0.0 ... 32767.0
- / real32 When 40.41 Set 1 sleep mode is set to Internal , this
parameter defines the wake-up level as deviation
between process setpoint and feedback. The unit is
selected by parameter
40.12 Set 1 unit selection .
When the deviation exceeds the value of this parameter,
and remains there for the duration of the wake-up delay
(
40.48 Set 1 wake-up delay ), the drive wakes up.
See also parameter 40.31 Set 1 deviation inversion .
Set 1 wake-up
deviation 40.47
1 = 1 rpm, % or Hz /
100 = 1 rpm, % or Hz Wake-up level (as deviation between process setpoint
and feedback). -32768.00 ...
32767.00 rpm, % or
Hz
0.50 s / real32 Defines a wake-up delay for the sleep function to
prevent nuisance wake-ups. See parameter
40.47 Set
1 wake-up deviation .
The delay timer starts when the deviation exceeds the
wakeup level (
40.47 Set 1 wake-up deviation ), and resets
if the deviation falls below the wake-up level.
Set 1 wake-up delay 40.48
430 Parameters