ABB ACS880 N5700 Series, Firmware Manual, Page: 356 / 662

Def / Type
FbEq 16b / 32b Description Name / Range /
Selection No.
7 1.11 DC voltage (page 135) . DC voltage
8 1.14 Output power (page 135) . Power inu out
10 23.1 Speed ref ramp input (page 270) . Speed ref ramp in
11 23.2 Speed ref ramp output (page 270) . Speed ref ramp out
12 24.1 Used speed reference (page 277) . Speed ref used
13 26.2 Torque reference used (page 297) . Torq ref used
See Terms and abbreviations (page 130) . Other [value]
20 1.70 Ambient temperature % (page 137) .
The amplitude range of 0…100% corresponds to
0…60 °C or 32…140 °F.
Ambient
temperature
100.00 / real32 Defines the signal value that corresponds to 100%
amplitude. AL2 signal scaling 36.7
1 = 1 / 100 = 1 Signal value corresponding to 100%. 0.00 ... 32767.00
- / uint16 Determines whether amplitude loggers 1 and 2 are
active continuously or only when the drive is
modulating. Logger function 36.8
0 = Amplitude logger 1 active continuously
1 = Amplitude logger 1 active only when the drive is
modulating AL1 b0
0 = Amplitude logger 2 active continuously
1 = Amplitude logger 2 active only when the drive is
modulating AL2 b1
Reserved b2…15
1 = 1 0000h…FFFFh
Done / uint16 Resets the peak value logger and/or amplitude logger
2.
(Amplitude logger 1 cannot be reset.) Reset loggers 36.9
0 Reset completed or not requested (normal operation). Done
1 Reset both the peak value logger and amplitude logger
2. All
2 Reset the peak value logger. PVL
3 Reset amplitude logger 2. AL2
- / real32 Displays the peak value recorded by the peak value
logger. PVL peak value 36.10
1 = 1 / 100 = 1 Peak value. -32768.00 ...
32767.00
0 / uint16 Displays the date on which the peak value was
recorded. PVL peak date 36.11
0 / uint32 Displays the time at which the peak value was recorded. PVL peak time 36.12
1 = 1 Peak occurrence time. 00:00:00…23:59:59
- / real32 Displays the motor current at the moment the peak
value was recorded. PVL current at peak 36.13
356 Parameters