ABB ACS880-31, Quick Installation Manual

Page: 12 / 148

12 EN – USA quick installation guide
EN
USA
DE
ES
FI
FR
FR
NL
PL
PT
RU
SV
TR
ZH
For information on reforming the capacitors, see Converter module capacitor
reforming instructions (3BFE64059629 [English]), available on the Internet at
abb.com/drives/documents .
Data

UL (NEC) ratings
Select the power cables
See the Data table on page 12 .
Ensure cooling
See the Data table on page 12 . No condensation or frost is allowed. The allowed
operating temperature range of the drive without derating is -15 to +40 °C.
Protect the drive and input power cable
Check on the fuse time-current curve to ensure that the operating time of the fuse is
below0.1 seconds. Obey the local regulations.
A – Install the drive on the wall
See figure A on page 141 .
Frames R6 and R8 of UL Type 12 (B056): Install an additional hood on top of
the drive before you tighten the upper fastening screws. Place the vertical edge of the
hood in between the wall and the drive back plate. Then tighten the screws to fasten
the hood and drive on its place. See figure
A (R6, R8) on page 141 .
ACS880-31
Cu cable
(AWG/kcmil)
UL fuse Losses (W)
3-phase U
N
= 480 V (440, 460, 480 V)
07A6-5 14 JJS-15 219
11A0-5 14 JJS-20 278
014A-5 10 JJS-25 321
021A-5 10 JJS-35 473
027A-5 8 JJS-40 625
034A-5 8 JJS-50 711
040A-5 6 JJS-60 807
052A-5 4 JJS-80 960
065A-5 2 JJS-90 1223
077A-5 2 JJS-110 1560
101A-5 1 JJS-150 1995
124A-5 2/0 JJS-200 2800
156A-5 3/0 JJS-225 3168
180A-5 250MCM JJS-300 3872
3AXD00000588487