ABB ACS880-304 +A018, Hardware Manual

Page: 227 / 280

Technical data 227
Ambient conditions
The unit is to be used in a heated indoor controlled environment.
Operation Storage Transportation
Altitude above sea level 0…2000 m (0…6561.7 ft)
For altitudes over
2000 m, contact ABB.
- -
Air temperature 0…+40 °C
(+32…+104 °F), no
condensation allowed
-40…+70 °C
(-104…+158 °F)
-40…+70 °C
(-104…+158 °F)
+40…+50 °C (+104…+122 °F) derating 1% /1 °C (+1.8 °F) above 40 °C
(+104 °F). For more information, see Ambient temperature derating on page
217 .
Relative humidity Maximum 95%, no
condensation allowed
Maximum 95%, no
condensation allowed
Maximum 95%, no
condensation allowed
Contamination IEC/EN 60721-3-3:2002:
Classification of
environmental conditions
- Part 3-3: Classification
of groups of
environmental
parameters and their
severities Stationary use
of weather protected
locations
IEC 60721-3-1 IEC 60721-3-2
Chemical gases Class 3C2 Class 1C2 Class 2C2
Solid particles Class 3S1 Class 1S3 (packing must
support this, otherwise
1S2)
Class 2S2
No conductive dust
allowed.
Vibration
IEC 61800-5-1
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing
Part 2: Tests -Test Fc:
Vibration (sinusoidal)
10…57 Hz, max.
0.075 mm amplitude
58…150 Hz 1 g
Tested in ABB multidrive
cabinet (ACS880-x07)
according to:
Max. 1 mm (0.04 in.)
(5 … 13.2 Hz),
max. 0.7 g
(13.2 … 100 Hz)
sinusoidal
For modules and
cabinets in packages:
IEC/EN 60721-3-1:1997
Classification of
environmental conditions
- Part 3: Classification of
groups of environmental
parameters and their
severities - Section 1:
Storage
For cabinet package:
IEC/EN 60721-3-1:1997
Classification of
environmental conditions
- Part 3: Classification of
groups of environmental
parameters and their
severities - Section 2:
Transportation
Shock
IEC 60068-2-27:2008
EN 60068-2-27:2009
Environmental testing -
Part 2-27: Tests - Test Ea
and guidance: Shock
Not allowed With packing max.
100 m/s
2
(330 ft./s
2
)
11 ms
With packing max.
100 m/s
2
(330 ft./s
2
)
11 ms
Cooling
Method Forced air cooling