ABB ACS880-17, User Manual

Page: 14 / 58

14 Introduction to the manual
Quick reference guide for implementing a safety system
Task
Select the appropriate functional safety standard for the implementation: EN ISO 13849-1,
EN/IEC 62061, IEC 61511 or other.
If you select EN/IEC 62061 or IEC 61511, make a safety plan. See EN/IEC 62061 or IEC 61511.
Assess safety: analyze and evaluate risks (estimate SIL/PL) and define risk reduction strategies.
Define the safety requirements.
Design the safety system. The part of the design made by ABB is described in chapter Option
description and instructions on page 15 .
Verify the achieved SIL/PL with, for example, FSDT-01 Functional safety design tool or similar. See
Functional safety design tool user’s manual (3AXD10000102417 [English]).
Connect the wiring. See section Wiring on page 30 .
Set the necessary parameters. See chapter Parameter settings on page 35 .
Validate that the implemented system meets the safety requirements:
• Do the acceptance test. See chapter Start-up and acceptance test on page 45 .
Write the necessary documentation.