![background image](http://html1.mh-extra.com/html/abb/acs880-17/acs880-17_user-manual_3437522035.webp)
Parameter settings 35
3
Parameter settings
Contents of this chapter
This chapter lists the parameters that you have to set in the FSO module and the drive.
Introduction
The person who configures the safety functions in the FSO module must be a competent
person as required by IEC 61508-1 clause 6. In this context, the person must have
expertise and knowledge of functional safety, the safety functions as well as the
configuration of the FSO module. We recommend our training courses on the FSO
module.
The example parameter values in this chapter are valid for the example Emergency stop,
stop category 0 and stop category 1 safety functions presented in this manual (+Q979).
We assume that the FSO module is only used in either of the example safety functions and
not in any other safety function at the same time. However, the actual deliveries vary. You
must always check the pre-set parameter values against the delivery specific circuit
diagrams and your application needs, and adjust the parameters values when necessary.
FSO module
You need the Drive composer pro PC tool to set the FSO module parameters, and a
password to be able to download the configuration to the FSO module from Drive
composer pro. For the default password of the FSO module, see the FSO module user’s
manual. For more information on the Drive composer pro PC tool, see
Start-up and
maintenance PC tool Drive composer user’s manual
(3AUA0000094606 [English]).
Note
: When the motor is running, you cannot change the password, adjust the
parameters, or upload or download the FSO configuration file.
Summary of Contents for ACS880-17
