ABB ACS880-14, Hardware Manual

Page: 58 / 248

Layout example, door open (0B051)
This diagram shows a layout example for drive modules with no IP20 shrouds (option
+0B051) or no cabling panels (H381 not included).
PE
T3/W2
T2/V2
T1/U2
1
4
5
6
7
9
3
2a
2a
13
14
10
11
3
2d
2e
2e
L1/U1
L2/V1
L3/W1
2b
2c
14
12
A
A
A – A
15
B– B
16
B
B
8
Motor cable including the protective ground con-
ductor of the drive module 9 Supporting frame of the cabinet 1
Drive module control unit 10
Vertical (2a, 2b) and horizontal (2c, 2d) air baffles
that separate the cool and hot areas (leak-proof
lead-throughs). See section
Preventing the recir-
culation of hot air (page 60) .
2
External control cables 11
Optional air baffle that is needed when there is
no fan on the lower part of the cabinet door. See
section
Preventing the recirculation of hot
air (page 60) .
2e
Grounding screws 12 Cabinet grounding busbar (PE) 3
Alternative to grounding screws (12) 13 Input power cable including the protective ground
conductor (PE) of the drive 4
Air flow to the roof 14 Disconnector and fuses 5
Air flow through the drive module 15 Contactor 6
Air flow through the LCL filter 16 Drive module 7
- - LCL filter module 8
58 Guidelines for planning the mechanical installation