ABB ACS880-04F-504A-3, Hardware Manual

Page: 49 / 202

Box B3 contents (H370)
Metallic shroud with ground bar 1
Paper fill 2
Input cable connection terminal L3/W1 3
Input cable connection terminal L2/V1 4
Input cable connection terminal L1/U1 5
Cardboard box 6
Screws and insulators in a plastic bag 7
3AXD5000009522
3
6
4
2
5
1
7
Accessory box contents: Assembly kit
3AXD50000453900
1
3AXD50000453894
3
4
5
2
Screw package, includes also
spacers for FSO module installation 1
Rubber grommets for control unit
cable entry holes in the middle front
cover of the drive module 2
Fastener for Rittal VX25 enclosure 3
Bracket for attaching the drive
module from top
(3AUA0000096082). The bracket
brings a gap for cooling air flow and
prevents the drive module screws
from chafing the plate. 4
Cardboard box 5
￭
Examining the delivery
Make sure that all items listed in section Moving and unpacking the unit (page 45) are
present.
Make sure that there are no signs of damage. Before you start the installation and
operation, see the information on the type designation label of the drive to make sure
that it is of the correct type.
￭
Lifting
Insert lifting hooks to the drive module lifting eyes and lift the module to the installation
place.
Mechanical installation 49
10