ABB ACS880-01 Series, Firmware Instructions

Page: 333 / 664

Parameters 333
35.100 DOL starter control
source
Parameters 35.100 … 35.106 configure a monitored start/stop
control logic for external equipment such as a contactor-
controlled motor cooling fan.
This parameter selects the signal that starts and stops the
fan.
0 = Stop
1 = Start
The output controlling the fan contactor is to be connected to
parameter
35.105 , bit 1. On and off delays can be set for the
fan by 35.101 and 35.102 respectively. A feedback signal
from the fan can be connected to an input selected by 35.103 ;
the loss of the feedback will optionally trigger a warning or
fault (see
35.104 and 35.106 ).
Off ; 06.16 b6
( 95.20 b6)
Off 0 (function disabled). 0
On 1. 1
Running Bit 6 of 06.16 Drive status word 1 (see page 167 ). 2
Other [bit] Source selection (see Terms and abbreviations on page 148 ). -
35.101 DOL starter on
delay
Defines a start delay for the motor fan.
The delay timer starts when the control source selected by
parameter
35.100 switches on. After the delay, bit 1 of 35.105
switches on.
0 s
0…42949673 s Motor fan start delay. 1 = 1 s
35.102 DOL starter off
delay
Defines a stop delay for the motor fan.
The delay timer starts when the control source selected by
parameter
35.100 switches off. After the delay, bit 1 of 35.105
switches off.
20 min
0…715828 min Motor fan stop delay. 1 = 1 min
35.103 DOL starter
feedback source
Selects the input for motor fan feedback signal.
0 = Stopped
1 = Running
After the fan is started (bit 1 of
35.105 switches on), feedback
is expected within the time set by 35.104 .
Not selected ;
DI5
( 95.20 b6)
Not selected 0. 0
Selected 1. 1
DI1 Digital input DI1 ( 10.02 DI delayed status , bit 0). 2
DI2 Digital input DI2 ( 10.02 DI delayed status , bit 1). 3
DI3 Digital input DI3 ( 10.02 DI delayed status , bit 2). 4
DI4 Digital input DI4 ( 10.02 DI delayed status , bit 3). 5
DI5 Digital input DI5 ( 10.02 DI delayed status , bit 4). 6
DI6 Digital input DI6 ( 10.02 DI delayed status , bit 5). 7
DIO1 Digital input/output DIO1 ( 11.02 DIO delayed status , bit 0). 10
DIO2 Digital input/output DIO2 ( 11.02 DIO delayed status , bit 1). 11
Other [bit] Source selection (see Terms and abbreviations on page 148 ). -
No. Name/Value Description Def / FbEq16